News

Splicing And Installation Skills Of Inkjet Cloth That Advertising Sign Companies Do Not Want To Disclose

Such a large picture, but the equipment is limited, usually the maximum width of large-scale point equipment is 5 meters, and other models are more than 3 meters, the only solution to make inkjet pictures beyond these ranges is to print the pictures After multiple small pictures are spliced together, they are combined into the desired large-scale picture printing.
1
Splicing of inkjet cloth

Both the inkjet printer and the inkjet cloth have a width limit. If the width exceeds the corresponding width, it needs to be spliced. The overlapping part of the splicing is about 4cm. Generally, the frame size will be very large during splicing, and a larger site is often required. For splicing, it is necessary to use scissors and other tools to cut off the white edge of the inkjet cloth and fix it. There are usually two ways to splicing inkjet cloth.

Printing cloth adhesive

Instructions:
1 When the inkjet cloth is bonded, the bonding surface must be kept clean and flat, pour an appropriate amount of glue into the container, use a brush to dip a little glue and apply it evenly on the place to be bonded.
2. During the bonding process of the light box cloth, the length of the inkjet cloth should be about one centimeter. The inkjet cloth only needs to be glued on one side (grid surface), and the thickness of the glue should not be too thick, just cover it with one layer evenly.
3. After a few seconds, press the splicing part flat, and it will be firmly bonded in 5-1 minutes, and the expected bonding strength will be reached after 2 hours.
4. Wipe the glue bottle clean after use, and tightly cover it, store it in a cool and dry place or refrigerate.

Printed cloth splicing machine

Instructions:
Printed cloth splicing machines are all hot-melt and press-fit machines. There are roughly two temperature control methods, one is current adjustment, and the other is digital constant temperature.

The temperature of the machine that adjusts the current is directly related to the voltage of the factory building. If the voltage of the factory building is unstable, the temperature of the machine will fluctuate, resulting in broken, missed or burnt, which is difficult to control.

The other is digital constant temperature, which is a more advanced temperature control method. Novices are also easy to operate. Each type of inkjet cloth has a corresponding temperature and speed. Generally, the temperature floats at 20°C. You can adjust the corresponding temperature and speed according to your own materials. After the temperature is adjusted, first pull in the two ends of the inkjet cloth, and then fix and tighten them about 20cm away from the two ends, that is to say, fix 8 points, leave 3cm white edges on the inkjet cloth, and the entire screen overlaps by 5cm, and the screen overlaps by 2cm. It can ensure that the picture is relatively large and shrinks without affecting the overall picture effect.

2
Inkjet installation

There are three key points in the installation of inkjet painting: one is to stretch the inkjet cloth straight, the other is to make it firm, and the third is not to tear the inkjet cloth. The following are common inkjet cloth installation methods.

 

1. For small-scale inkjet, use cement nails to nail on the wall along the perimeter of the inkjet advertisement, or paste it with glue, which is simple and convenient.

2. Car body spray painting. Generally speaking, more than two people are required for large body spray painting. Use 502 glue to paste it, or put a buttonhole on the spray cloth first, and then fix it with a rope. Of course, generally the inkjet painting on the car body is short-term inkjet painting, such as festivals, opening ceremonies, etc. If you want to do long-term advertising, then inkjet painting is not suitable.

3. For truss printing, this type of printing needs to bleed 5cm~15cm around the printing, double-layered and buckled, and fixed with thin wires or cable ties. For some small trusses, it can also be fixed with glue.

4. Ink-painting on the storefront at the door: according to the condition of the wall, weld the iron frame on the wall, and then fix the inkjet cloth with glue; of course, you can also replace the iron frame with a wooden frame, but the weather resistance is not as good as the iron frame.

5. For large-scale inkjet painting: one wooden strip can be nailed up and down horizontally, and ring nails or other fixtures are placed on the upward section of the wooden strip, and the upper and lower holes of the inkjet cloth are fastened to the ring nails with cable ties. When installing, the distance between the upper and lower wooden strips is good, and the inkjet cloth surface is generally tight and will not tear~

6. For the spray painting on the exterior wall of some high-rise buildings, because the spray painting is higher than the ground, professional high-altitude workers are required to use cables to fall from a high place; or use aerial work vehicles to lift people to the corresponding height from the ground , to install.

You Might Also Like

Send Inquiry